About this product

Flopro Round Tap Connector

Confirmed format: Snap-fit hose connector for round and oval non-threaded taps • maximum tap diameter 20mm • stainless-steel securing clip

Product Highlights: Connects a garden hose to round or oval taps • Ideal for non-threaded indoor taps • Fits tap spouts up to 20mm diameter • Stainless-steel clip provides a secure seal • Premium-grade plastic construction • Quick snap-fit hose connection • Compatible with all major watering brands

Overview

The Flopro Round Tap Connector provides a simple way to connect a garden hose to a round or oval tap without a standard threaded hose connection. It is particularly useful for indoor taps where an outside water connection is not available, allowing you to run a hose from a suitable kitchen, utility-room or similar tap.

Designed for round and oval tap spouts with a maximum diameter of 20mm, the connector is held securely in position using a stainless-steel clip. Once fitted, its standard snap-fit outlet provides quick connection to a garden hose equipped with a compatible female hose connector.

Why We Love It

• Ideal for non-threaded taps – useful when a conventional screw-on tap connector cannot be fitted.

• Round and oval compatibility – designed specifically for these common tap-spout shapes.

• Secure fitting – the stainless-steel clip tightens the connector firmly against the tap.

• Simple hose connection – snap-fit outlet makes connecting and disconnecting straightforward.

• Universal watering compatibility – works with all major snap-fit watering brands.

Product Details

How to Use

Fit to the Tap

Loosen the stainless-steel clip sufficiently to allow the connector to fit over the end of the tap.

Push the fitting securely onto a suitable round or oval tap spout, ensuring it is correctly seated.

Tighten the stainless-steel clip until the connector is held securely and a good seal is formed.

Connect the Hose

Fit a compatible female snap-fit connector to your garden hose and push it onto the outlet of the Round Tap Connector.

Turn the tap on gradually and check that the connector remains secure and properly sealed before increasing the water flow.

Perfect For

• Round tap spouts

• Oval tap spouts

• Suitable kitchen taps

• Utility-room taps

• Homes without a convenient outdoor tap

• Non-threaded taps up to 20mm diameter

• Temporary garden hose connections

Good to Know

The Flopro Round Tap Connector is designed for round and oval tap spouts up to 20mm in diameter. It is not intended for square or unusually shaped tap outlets.

Because the fitting clamps around the tap rather than screwing onto a thread, it is particularly useful where a standard threaded outdoor tap connector cannot be used.

The connector's snap-fit outlet is compatible with all major watering brands, making it easy to incorporate into an existing garden hose setup.

Care & Storage

Check that the stainless-steel clip is correctly tightened before turning on the water, but avoid excessive tightening that could damage the connector or tap.

Turn off the water supply before removing the fitting. Drain and dry the connector after use and store it in a dry, frost-free location when not required.

Product Information